Aquaguard Select Designo UTC WS RO+UV – 3. Quick Start Guide

Aquaguard Select Designo UTC WS RO+UV – 3. Quick Start Guide

⚡ QUICK START GUIDE

Aquaguard Select Designo UTC WS RO+UV

🧰 1. What You Need

Before starting, ensure you have:

  • Purifier unit

  • 8‑litre storage tank

  • Input pipe & reject pipe

  • Diverter valve

  • Installation kit

  • Power socket near the sink

🏠 2. Choose the Right Spot

  • Install the purifier under the kitchen sink

  • Ensure space for both unit + tank

  • Keep it away from heat sources

  • A dedicated purified water tap must be installed on the sink

🔧 3. Connect the Pipes

  1. Attach the diverter valve to the cold‑water line

  2. Connect the input pipe to the purifier

  3. Connect the reject pipe to the drain

  4. Tighten all joints to avoid leakage

⚡ 4. Power On

  • Plug the purifier into a 230V AC grounded socket

  • Switch on the power

  • Ensure indicator lights turn on

💧 5. First Tank Setup

  1. Turn on the water supply

  2. Let the tank fill completely

  3. Discard the first full tank (recommended)

  4. Check for leaks and proper water flow

🔍 6. Quick Checks

  • Purified tap flow is smooth

  • No leakage from pipes

  • Tank fills normally

  • Reject water drains properly

📞 Need Help?

For installation or service: Eureka Forbes Customer Care Phone: 7039883333 Email: customercare@eurekaforbes.com